My Cart: 0 item(s)

Product Search
Spring sale! All PML blemished Specials 20% off until March 31. PML is closed March 29, Friday.
Search by Vehicle
Product Search

Secure Checkout
GM 200 4R Stock Capacity
    GM 200 4R Stock Capacity
    Purchase GM 200 4R Stock Capacity
    • GM 200 4R Stock Capacity
      Part Number 11070

    • Magnetic drain plug and mounting hardware included with PML stock capacity GM 200 4R pan.
      Price varies with finish. SEE PRODUCT INFO.

      $0.00

    • OPTIONAL - add machining of a 1/8 NPT hole for an aftermarket temperature sending unit:
    •  

    Volume: Stock

    Dimensions: Click here for dimensions.

    Number of Bolts: 16

    PML designed this pan to meet the demands of high performance cars that require a lower profile than our extra capacity 200–4R deep pan.

    Overall height is 3 1/8 inches. Although this pan is stock capacity, it is still larger than the stock pan. Always check your vehicle for clearance before ordering.

    Benefits:

    • Stiff construction
    • Finned
    • Aluminum cooling
    • Drain hole and magnetic drain plug
    • Thick, machined gasket flange for a secure seal
    • Filter supports
    • Location for optional drilling and tapping for a temperature sending unit

    This PML pan fits many models of rear wheel drive cars with the GM 200–4R 4 speed automatic transmission. GM used this transmission from 1982 to 1990. Many models of these vehicles have the 200–4R:

    • Buick Regal T Type
    • Grand National
    • Chevrolet Monte Carlo SS

    The 200–4R (or 200 R4) transmission is popular replacement transmission for high performance applications.

    Alway check your vehicle to verify clearance and fitment. Configurations vary.

    Our thanks to those who have sent us pictures of our 200 4R stock capacity pan installed on their vehicles.

    1977 Corvette

    Ron installed this PML 200 4R transmission pan on his Corvette with a 350 motor.

    1977 Corvette 350 200-4R transmission 1977 Corvette 350 200-4R transmission   PML 200 4R pan installed on a 1977 Corvette PML pan installed
    Click on image to view larger in a new tab or window.

    1970 Corvette

    Dave in New Zealand has a 1970 Corvette TT2 with a GM 200 4R transmission.

    Dave needed to fabricate a bracket to hold the shifter cable because the original one would not fit with the heavy duty PML pan. The middle picture (left hand side of the car) shows the bracket. He took the picture without the exhaust pipe fitted to get a good view.

    1970 Corvette TT2   1970 Corvette TT2 with PML 200 4R transmission pan left hand view   1970 Corvette TT2 with PML 200 4R transmission pan right hand view
    Click on image to view larger in a separate tab or window.

    1969 Pontiac Firebird

    Gordon installed this stock capacity PML pan for the 200 4R transmission during the restoration of his 1969 Pontiac Firebird.

    Pontiac Firebird with GM 200 4R transmission   Pontiac Firebird with PML 200 4R transmission pan installed, rear view   Pontiac Firebird with PML 200 4R transmission pan installed, front view
    Click on image to view larger in a separate tab or window.

    1964 Chevy C10

    Rod put this pan on his restored C10. He was happy to see the PML 200 4R transmission pan did not cause a ground clearance problem.

    1964 Chevy C10 1964 Chevy C10   PML 200 4R pan on 1964 Chevy C10 PML pan installed   PML 200 4R pan does not cause any ground clearance concerns clearance
    Click on image to view larger in a new tab or window.

    1964 El Camino

    Avery installed this PML transmission pan and PML Small Block Chevy valve covers on his 1964 El Camino.

    Avery’s El Camino has a custom crossmember about 1/2" too far forward, but this PML pan dropped right on. He said it was actually easier to install the PML pan than the stock one was to remove!

    1964 El Camino 1964 El Camino   Installing PML pan Installing PML Transmission Pan   PML 20 4R pan installed on 1964 El Camino 1964 El Camino with PML pan installed
    Click on image to view larger in a new tab or window.

    1930 Chrysler

    Tom reported the pan fit perfectly on his 1930 Chrysler work in progress. He also let us know that he was impressed with the high quality of the pan.

    1930 Chrysler 1930 Chrysler   200 4R OEM stock pan stock pan   1930 Chrysler PML 200 4R pan installed PML 200 4R transmission pan installed
    Click on image to view larger in a new tab or window.

    California Kid Car

    The California Kid car installed PML's 200-4R stock capacity pan. They used a custom powder coat to match the car. Even with a car this low, the PML pan fit.

    California Kid car at SEMA 2010   PML GM 200-4R transmission oil pan installed on the California Kid car
    Click on an image to view larger.

    PML GM 200-4R stock capacity pan filter supports

    Inside of PML 200 4R Pan

    Click on image to see a larger picture of the inside of the pan. A separate window will open and load the image.

    The four rectangular areas on the bottom of the pan are the filter supports. The drain is at the top, right of the picture.

    Filter Information

    This PML pan works with stock filters. Example part numbers are: AC Delco TF234, Fram FT1057B, Fram FT1057C, Hastings TF60, Purolator P1194, Wix 58896

    PML 200 4R transmission pans have filter supports so a filter extension is not needed.

    The supports hold the filter at the same level as the stock pan. The distance from the bottom of the stock pan to the top of the flange is 2.4 to 2.6 inches. The distance from PML filter supports to the top of the flange is the same. The stock filter is about 4.8 inches tall.

    This shows the inside of the stock and PML 200 4R pans:
    Filters 200 4R pan

    Some customers have reported to us that a 700R4 filter may also work with our 200 4R transmission pans. PML does not have any experience with this or recommend this.

    Filter information is provided for reference only. Installer should verify transmission, filter and fitment based on the individual vehicle.

    Drain Location and Optional Temperature Sending Unit Machining

    PML GM 200-4R drain and temp sending unit locations  Click on image to view larger.

    The drain is located on the driver side of the pan. A magnetic drain plug is included with each pan.

    Optionally, PML can drill and tap a 1/8 NPT hole for a temperature sending unit. This would be for an aftermarket temperature gage. There is a custom machining charge.

    A boss (thick area) on the passenger side of the pan is available for drilling and tapping.

    Select the option before adding pan to cart. A plug for the hole is included. The standard size is 1/8 NPT. Check your aftermarket gage to verify the thread specifications for the sending unit before ordering. Call or email if you need a different size.

    PML 200–4R Transmission Pans and Stock Pan Compared

    PML 200 4R transmission pans compared to stock   PML 200 4R Transmission Pans compared to stock, top view
    Click on image to view larger in a new tab or window.



    Related Products