My Cart: 0 item(s)

Product Search
Spring sale! All PML blemished Specials 20% off until March 31. PML is closed March 29, Friday.
Search by Vehicle
Product Search

Secure Checkout
GM 6L80, 6L80E Stock Capacity
    GM 6L80, 6L80E Stock Capacity
    Purchase GM 6L80, 6L80E Stock Capacity
    • GM 6L80, 6L80E Stock Capacity
      Part Number 11087

    • Pan includes magnetic drain plug, fill plug, and mounting hardware.

      If vehicle uses fill/level check on pan, verify level check height before ordering, see APPLICATIONS section and Verify Level Check PDF.

      Price varies with finish. SEE PRODUCT INFO.

      $0.00

    • OPTIONAL: add machining of a 1/8 NPT hole for an aftermarket temperature sending unit:
      OPTIONAL: Machine level check to 1 1/16" (see APPLICATIONS section for info):
    •  

    Volume: stock capacity compared to 3.3" deep stock pan, AC Delco part number 24243526

    Dimensions: Click here for dimensions.

    Number of Bolts: 18 (there are 20 holes, 2 holes locate the gasket and 18 holes for bolts to hold the pan to the transmission case)

    PML designed this transmission pan for 2006 and newer Cadillac, GMC, and Chevrolet cars and GM trucks and SUVs with the 6L80, 6L80E transmission.

    Benefits:

    • Maintains ground clearance or clearance to skid plate, only 5/8 inch deeper than stock
    • Heavy duty sand cast aluminum construction
    • Finned to dissipate heat from transmission fluid
    • Drain hole and magnetic drain plug for easier maintenance
    • Fill/level check hole and plug for filling the transmission through the pan
    • Thick walls to add strength to the transmission housing
    • Thick gasket flange, machined flat for a leak free seal

    There are several stock pans for the 6L80. This pan design is based on stock pan AC Delco part number 24243526.

    For vehicles without a dipstick, there is a fill/level check hole on the rear of the OEM pan. On some OEM pans, the fill/level check is 5/8 inch below the flange. This is measured on the INSIDE of pan. The PML pan is made with a level check 5/8 inch below the flange but the PML pan level check can be machined to match other OEM pans.

    If the exhaust crosses underneath the stock pan, you may need to drop or lower the exhaust to install this pan. Three bolts are difficult to access and there is not any space to manuever the thicker PML pan on to the transmission housing.

    This pan is about 5/8" deeper than the 3.3" stock pan.

    PML also makes a GM 6L80 deep transmission pan with extra capacity.

    This pan will fit the GM 6L80, 6L80E transmission found on many configurations of GM, Cadillac, Chevy and Hummer H2. Some possible vehicles:

    • Camaro 2010 to 2015, V8 6.2L
    • Hummer H2 2008 to 2009, V8 6.2L, with undercarriage protection (check clearance)
    • Trucks and SUVs needing more ground clearance than with the PML deep pan (such as those that are lowered or have skid plates)
    • Cadillac/Chevy/GM cars with 3.3" stock pan

    Check these items before ordering:

    1. Verify transmission is a 6L80/6L80E.
    2. Measure depth of stock pan since this PML pan replaces 3.3 inches deep stock pans.
    3. Check that there is clearance for a pan about 5/8 inch deeper.
    4. If vehicle requires use of fill/level check on pan, the level check height of the stock pan must match the level check height of the PML pan. This is a hassle, unfortunately. To find out the height of the level check to the flange, the pan cannot be on the transmission.

    Configurations vary and PML cannot guarantee fitment.

    Fill/Level Check Information

    There are several OEM stock pans for the 6L80 transmission. Some have a level check on the transmission pan and some do not. The three most common pans are: no level check on pan, level check 5/8" below flange, and level check 1 1/16" below flange. This is measured on the INSIDE of the pan.

    Other level check heights are possible. Contact PML if you have a level check height other than 5/8" or 1 1/16".

    If your OEM pan does NOT have the level check on the pan, this information does not apply since the dipstick is used to check the fluid level. Typically, the pan for pre 2019 trucks and SUVs does not have a fluid level check on the pan.

    Read this PDF about the 6L80 level check: Verify Level Check.

    By default, the PML level check is 5/8 inch from the flange:

    PML stock capacity 6L80 stock transmission pan level check  Click on image to view larger.

    Two OEM pans and level check heights:

    6L80 stock transmission pans side by side   Click on image to view larger.

    Some Corvettes and Cadillacs may have GM part number 24239529 (or a similar pan) with level check height larger than the PML default height. PML can machine the level check to 1 1/16" to match the OEM pan for these applications. Other level check heights are possible. Contact PML if you have a level check height other than 5/8" or 1 1/16".

    The INSTALLATIONS section shows pictures of a Corvette OEM pan and a PML pan with the level check machined to 1 1/16".

    OEM Stock Pan 2 1/4 Inches Deep

    Some cars, such as the Pontiac G8, use a 2 1/4 inches deep pan. This PML pan cannot replace the 2 1/4 inches deep stock pan since the fill level is different and the filter would not be supported.

    GM 8 stock transmission pan  PML pan cannot replace this pan. Click on image to view larger.

    Our thanks to those who have emailed us pictures of their installations.

    For a Corvette, PML can machine level check to match OEM pan.

    • 2012 Camaro
    • 2010 Camaro

    • 2011 Corvette
    • 2009 Corvette

    • 2012 Silverado
    • 2011 Silverado

    • 2010 Suburban

    2012 Camaro, Installation by PATC

    PATC, Performance Automotive and Transmission Center, powder coated our pan to match their 2012 Camaro 2SS.

    2012 Camaro, 6L80E transmission, PML pan    PML transmission pan on 2012 Camaro, side view    PML transmission pan on 2012 Camaro

    Watch the YouTube Video of the PATC Camaro.

    2010 Camaro, Installation by Bowler Performance Transmissions

    This shows the stock pan and the PML pan installed on a 2010 Camaro. Installation by Bowler Performance Transmissions in Illinois. Transmission pan is in the natural as-cast finish.

    2010 Camaro, stock transmission pan    2010 Camaro, PML transmission pan    2010 Camaro, PML transmission pan with fill
    Click on image to view larger in new tab or window.

    2011 Corvette

    To have the correct transmission fluid level, PML machined the level check to match the OEM pan level check. Jake verified that the PML pan and OEM pan levels matched. Jake reported that the pan worked great.

    2011 Corvette 6L80 transmission and filter 2011 Corvette 6L80 Transmission   6L80 OEM transmission pan and PML pan OEM and PML transmission pans   Corvette OEM 6L80 pan level check Level check on Corvette OEM pan   PML 6L80 transmission pan level check for Corvette PML 6L80 pan level check modified for Corvettes   PML 6L80 transmission pan on 
2011 Corvette PML 6L80 pan installed, view of rear of pan   PML 6L80 pan on Corvette, drain plug on driver side PML 6L80 pan installed, driver side view   PML 6L80 pan on Corvette, view from front of car PML 6L80 pan installed, front view   2011 Vette 6L80 pml transmission pan 2011 Corvette with PML 6L80 transmission pan installed, view from passenger side
    Click on image to view larger in a new tab or window.

    2009 Corvette Z51, Installation by Ernie Naugle

    Ernie installed the PML stock capacity 6L80 pan on his 2009 (2010 model year) Corvette Z51. Our thanks to Ernie for emailing us a picture of the installed pan.

    PML transmission pan on 2009 Corvette  Click on image to view larger.

    2012 Silverado 1500

    The customer installed this PML transmission pan on his 2012 Chevrolet Silverado Extended Cab 4x4 with 5.3L engine.

    2012 Chevy Silverado 1500 2012 Chevy Silverado 1500   2012 Chevy Silverado 1500 with stock transmission pan Stock Pan   2012 Chevy Silverado 1500 with PML transmission pan installed PML Pan   2012 Chevy Silverado 1500 with PML transmission pan installed 2 PML Pan 2
    Click on image to view larger in a new tab or window.

    2011 Silverado 1500

    Charles installed the PML stock capacity 6L80 pan on his 2011 Chevy Silverado LTZ 5.3L truck. He sent PML the pictures with the comment "Great product"!

    2011 Chevy Silverado 1500 LTZ 2011 Silverado 1500 LTZ 5.3L   PML 6L80 transmission pan on a 2011 Silverado 1500 PML pan installed   Click on image to view larger in a new tab or window.

    2010 Suburban 1500

    Ben installed this PML transmission pan on his Suburban. He also installed a PML differential cover. He loves having drain plugs!

    2010 Suburban, driver side view of PML pan PML 6L80 pan installed on 2010 Suburban   2010 Suburban with PML pan Drain plug on PML 6L80 transmission pan, installed on a 2010 Suburban   2010 Suburban 2010 Suburban 1500
    Click on image to view larger in a new tab or window.

    Inside of PML Pan

    PML GM transmission pan, stock capacity, heavy duty, inside  Click on image to view larger.

    Gasket Information

    PML designed this stock capacity transmission pan for GM 6L80 transmission to use the stock OEM gasket. The stock OEM gasket is reusable. Make sure the gasket is clean and free of any holes or nicks to avoid leaks.

    Filter Information

    PML designed this stock capacity transmission pan for GM 6L80 transmission to use the stock OEM filter.

    Check your stock pan depth. We based our design on a stock pan that is 3.3 inches deep. The filter is held in place by the bottom of the pan. Some stock pans are not 3.3 inches deep. For exapmle, the pan for a Pontiac G8 is 2 1/4 inches deep. This pan probably cannot replace that stock pan.

    No filter supports or extensions are needed since this pan is the same internal depth as the 3.3 inches deep stock pan. On the outside, this pan is larger than the stock pan. If the stock pan is not 3.3 inches deep, there will be problems with the filter.

    The stock GM filter is "GM Part No. 24236517" and the AC Delco box has part number "24236933".

    GM 6L80E transmission, filter, and reuseable factory gasket  Click on image to view larger.

    Fill/Level Check Hole

    Some vehicles use a level check hole on the pan instead of a dipstick. The level check hole on the pan is only needed if your stock pan has a level check hole for monitoring the fluid level. Many trucks have a dipstick and do not need a level check on the pan.

    PML used AC Delco 24243526 to set the height for the level check hole in this transmission pan.

    NOTE: Other stock pans may have different heights for the top of the level check. Read this PDF file with details and see the APPLICATIONS section.

    PML stock capacity 6L80E pan level check hole  Click on image to view larger.

    Optional Temperature Sending Unit Machining

    Optionally, PML can drill and tap a 1/8 NPT hole for a temperature sending unit. This would be for an aftermarket temperature gage. There is a custom machining charge.

    There are three possible locations on this pan for this.
    drilling and tapping locations  Click on image to view larger.

    Select the option before adding pan to cart. A plug for the hole is included.

    The standard size is 1/8 NPT. Check your aftermarket gage to verify the thread specifications for the sending unit before ordering. Call or email if you need a different size.

    Drain and Included in Package

    The drain is on the driver's side.

    This pan includes a magnetic drain plug with a reusable copper sealing washer and mounting bolts. A plug is included for the fill hole.

    Included with PML 6L80 stock capacity pan, cast finish   Included with PML 6L80 stock capacity pan, powder coat finish  Click on image to view larger.

    PML 6L80E Transmission Pans and GM Stock Pan Compared

    PML 6L80 pan part number 11087 compared to stock   PML Transmission Pan Part Number 11087, compared to stock, top view
    Click on image to view larger in a new tab or window.

    This image compares the depth of both PML 6L80 transmission pans and the stock pan. Click on image to view larger in a new tab or window.
    PML 6L80 transmission pan depth comparison

    The G8 stock pan is about 2 1/4 inches. PML does not make a pan to replace the 2 1/4 inches stock pan. Always check your vehicle before ordering.



    Related Products