My Cart: 0 item(s)
These valve covers are on special because they are discontinued. The PML Part Number is 8357-6.
The oval pad in the middle is the same size is the oval FORD logo but the pad can be used for any design. The Ford logo is NOT included.
A gasket is available.
This special should fit and function like regular PML perimeter mount, small block Chevy valve covers.
This is sold as-is and cannot be returned.
Topview of valve covers.
Inside of valve covers.
The top part of a valve cover.
One of the sides of a valve cover.
SPECIFICATIONS
Dimensions: Click here for dimensions in a pdf file. A separate window will open and load the file.
Finishes: Read about finishes and construction of PML parts. These covers are in the natural as cast finish.
These PML valve covers are standard perimeter mount covers for 1960 to 1986 small block Chevy engines (265, 283, 327, 350, 400). The bolt holes are straight across from each other (not offset or staggered).
The oval pad and fins are cast into the cover and are raised.
The pad for your own logo or other design. The pad on the casting is 3.15 by 1.6 inches. When attaching a logo, keep in mind that engines get hot so be sure to use a logo and adhensive that will withstand the heat.
These covers are larger than stock. They have a mid-height design that will clear some roller rockers. Please check dimensions in above link to verify clearance for your particular configuration.
These valve covers can be machined with PCV and breather holes. One of those holes can be used for oil fill. PML designed these covers to be machined for PCV, breather and oil fill on the intake manifold side. Holes must be ordered over the phone and this will be custom machining. There is a machining charge. Additional information and pictures in this PCV, breather and oil fill for 8357 valve covers PDF.
Some additional pictures of these valve covers, shown with Ford logo installed, along with other discontinued valve covers, are in this old valve cover PDF.