Dana 60, 70, 10 Bolt, Straight Fins, Differential Cover

PML Part Number 6059

PML makes two covers for this differential. See also PML Dana 60, 70 Patterned Fins Cover.

Image of polished part not available.

Volume: approximately ½ to ¾ quarts over stock

Dimensions: Click here for dimensions.

This Dana differential cover fits the rear end on applicable Dodge, Ford and GM trucks and vans. The ring gear varies with application (commonly 9.75 or 10.5 inches).

Some popular rear end applications for this Dana 60, 70 differential cover are:

• GM 3/4 and 1 ton trucks, 1969 to 1997
• Ford F250 and F350 trucks, 1966 to 1985
• Ford Van E250 and E350, 1975 to 1985
• Dodge Ramcharger
• Dodge Pick-ups 100, 150, 200
• Dodge Duellie

Since configurations vary, always check your vehicle before ordering to verify configuration and clearance.

PML Differential Cover Compared to Stock

  
Click on image to view larger.

These images show this PML differential cover compared to the stock cover.

This image compares the depth of both PML Dana 60/70 rear differential covers and the stock cover. Click on image to view larger in a new tab or window.

For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

PML Differential Cover Features:

• Increased oil capacity for cooler temperatures
• Sand-cast aluminum with raised fins
• 3/16-inch thick wall construction to add strength to differential housing
• 3/8-inch thick gasket flange will not bend when bolts are tightened
• Machined gasket surface for a secure seal using RTV or factory reusable gasket
• Oil changes without removing the cover
• All hardware provided, including magnetic drain plug

Learn more about finishes and construction of PML parts.