Volume: about 0.75 quarts over stock
Dimensions: Click here for dimensions.
Number of Bolts: 12 bolts
PML designed this cover for 2015 and newer Ford F-150 trucks with the new Ford 8.8 inch Super or HD; rear differential.
Some Mustangs and other Ford or Mercury vehicles may also have this new differential and be able to use this cover.
Benefits:
- Bolt on replacement for stock cover
- Additional 3/4 quart capacity over stock
- Fins for dissipating heat
- Pads for using stock clips to keep lines routed above differential in place
- Drain hole and a magnetic drain plug included for easy servicing
- Fill hole on side
- Heavy duty sand cast aluminum construction
- Hardware included
- Can be drilled and tapped for a temperature sensor (optional)
- 2015 and newer Ford F150
Always check your vehicle to verify your differential and clearance. Configurations vary.
Some Mustangs and other Ford or Mercury vehicles may also have this new differential and be able to use this cover.
Some F-150 trucks have the larger Ford 9.75 (9 3/4) inch ring gear rear differential, which also has 12 bolts, but a different shape.
Our thanks to those who have provided information and pictures of their trucks.
Video of an installation:
2018 Ford F–150
Torrance Transmissions (310-378-9217) installed this differential cover and a PML 10R80 transmission pan on Pat's 2018 F150, 5.0 2WD. The cover was an easy and welcome upgrade for this work truck.
2018 F150 2WD V8 5.0L
stock rear cover
Plenty of space between spare tire and stock cover
for PML cover
Level check hole
Brake line back in place
PML Super 8.8 cover installed
Click on image to view larger in a new tab or window.
2017 Ford F150
CGS Motorsports 2017 F150 won the "Best of Show Award for Outstanding Achivement in Design" at the 2016 SEMA Show for this truck. As part of the build, they installed this PML rear differential cover in the cast finish.
The truck was featured in the Ford booth at the show and later photographed for Truckin' magazine. This truck appeared on the cover of Truckin' in August 2017. Thanks to CGS for including us in their award winning design!
Click on image to view larger.
2016 Ford F150
Warren installed this cover on his 2016 Ford F150 5.0L 4x4 truck. He reported that "removing the spare tire made access to the diff cover much easier, as depicted in the photos. The only time consuming issue was removing an excessive amount of thread locker and silicone material from the bolt holes Ford had applied. Again all of the supplied information, hardware and the PML diff cover it's self installed perfectly." Our thanks to Warren his comments and pictures.
Click on image to view larger.
2015 Ford F150
Jared put this cover on his SEMA 2016 Show Truck. He tested the fit and then custom powder coated it. Truck is a 2015 Ford F150 5.0L Lariat.
Click on image to view larger.
2015 Ford F150 2.7L
Tim in Idaho installed this PML Super 8.8 cover on his 2015 F150.
2015 Ford F-150 2.7
Stock Cover
Differential
Applying RTV
Putting in fluid
PML cover installed
Click on image to view larger in a new tab or window.
Fill and Level Check
Level check is on the carrier. To fill, add fluid through fill hole on the side of the cover. Stop adding once fluid starts to dribble out level check hole.
Optional Machining for Temperature Sending Unit
This cover has a location for a temperature sensor on the right side of the cover. Optionally, it can be machined for a 1/8 NPT. There is a machining charge for PML to drill and tap the hole.
Included with PML Differential Cover
PML includes a magnetic drain plug, new mounting bolts and a fill plug with the cover.
Click on image to view larger.
Inside of Cover
Click on image to view larger.
PML Differential Cover Compared to Stock
Click on image to view larger in a new tab or window.
Stock F150 Cover
PML Cover Installed on an F150
From left to right: Stock Cover on an F150, New PML Cover on an F150. Click on image to view larger.